
Add to Cart
LT3680EDD#PBF Power Path Management IC Switching Voltage Regulators 36V, 3.5A, 2.4MHz uPwr Step Down Regulator in DFN
FEATURES
Wide Input Voltage Range: 3.6V to 36V
3.5A Maximum Output Current
Low Ripple (<15mVP-P) Burst Mode® Operation: IQ = 75μA at 12VIN to 3.3VOUT
Adjustable Switching Frequency: 200kHz to 2.4MHz
Low Shutdown Current: IQ < 0.5μA
Integrated Boost Diode
Synchronizable Between 250kHz to 2MHz
Power Good Flag
Saturating Switch Design: 95m On-Resistance
0.790V Feedback Reference Voltage
Output Voltage: 0.79V to 30V
Thermal Protection
Soft-Start Capability
Small 10-Pin Thermally Enhanced MSOP and (3mm × 3mm) DFN Packages
APPLICATIONS
Automotive Battery Regulation
Power for Portable Products
Distributed Supply Regulation
Industrial Supplies
Wall Transformer Regulation
DESCRIPTION
The LT®3680 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V. A high efficiency 95m switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3680 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage. The LT3680 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with exposed pads for low thermal resistance.