
Add to Cart
Stock Offer (Hot Sell)
Part No. | Quantity | Brand | D/C | Package |
LTC4301CMS8 | 4300 | LINEAR | 16+ | MSOP-8 |
LTC4311ISC6 | 3092 | LT | 15+ | SC70 |
LTC4357CMS8#PBF | 3990 | LINEAR | 16+ | MSOP-8 |
LTC4365CTS8 | 4339 | LINEAR | 16+ | SOT-23 |
LTC4365CTS8#TRPBF | 4310 | LINEAR | 15+ | SOT23-6 |
LTC4425EMSE#TRPBF | 2954 | LINEAR | 16+ | MSOP-12 |
LTC6903CMS8#PBF | 6610 | LT | 14+ | MSOP-8 |
LTC6903IMS8#PBF | 5190 | LT | 11+ | MSOP-8 |
LTC6908IS6-1 | 3669 | LT | 16+ | SOT23-6 |
LTC6930CMS8-4.19#PBF | 6620 | LT | 16+ | MSOP-8 |
LTM8045IY#PBF | 2038 | LINEAR | 12+ | BGA40 |
LTST-C150KSKT | 12000 | LITEON | 13+ | SMD |
LTST-C170KGKT | 9000 | LITEON | 15+ | LED |
LTST-C171KRKT | 9000 | LITEON | 16+ | SMD |
LTST-C190KGKT | 9000 | LITEON | 15+ | SMD0603 |
LTST-C191KGKT | 12000 | LITEON | 16+ | SMD |
LTST-C193KRKT-5A | 21000 | LITEON | 15+ | SMD |
LTST-S220KRKT | 116000 | LITE-ON | 16+ | LED |
LTV354T | 18000 | LITEON | 14+ | SOP-4 |
LTV-356T | 119000 | LITEON | 14+ | SMD-4 |
LTV356T-D | 47000 | LITEON | 14+ | SOP-4 |
LTV4N25 | 72000 | LITEON | 16+ | DIP |
LTV817C | 12000 | LITEON | 14+ | DIP |
LTV-817S-TA1-A | 56000 | LITE-ON | 13+ | SMD-4 |
LTV827 | 62000 | LITEON | 16+ | DIP-8 |
LTV847S | 19474 | LITEON | 13+ | SOP-16 |
LX6503IDW | 9119 | MSC | 09+ | SOP-16 |
LXT6234QE BO | 4013 | INTEL | 16+ | QFP100 |
LXT980AHC | 740 | INTEL | 13+ | QFP208 |
M13S2561616A-5T | 9090 | ESMT | 14+ | TSSOP |
TDA8571J
4 x 40 W BTL quad car radio power amplifier
FEATURES
• Requires very few external components
• High output power
• Low output offset voltage
• Fixed gain
• Diagnostic facility (distortion, short-circuit and temperature pre-warning)
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• Load dump protection
• Short-circuit safe to ground and to VP and across the load
• Low power dissipation in any short-circuit condition
• Thermally protected
• Reverse polarity safe
• Electrostatic discharge protection
• No switch-on/switch-off plop
• Flexible leads
• Low thermal resistance
• Pin compatible with the TDA8568Q, except for the gain.
GENERAL DESCRIPTION
The TDA8571J is a integrated class-B output amplifier contained in a 23-lead Single-In-Line (SIL) plastic power package. It contains four amplifiers in a BTL configuration, each with a gain of 34 dB. The output power is 4 × 40 W (EIAJ) into a 4 Ω load.
APPLICATIONS
• The device is primarily developed for car radio applications.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL | PARAMETER | CONDITIONS | MIN. | MAX. | UNIT |
VP | supply voltage | operating | - | 18 | V |
non-operating | - | 30 | V | ||
load dump protection; during 50 ms; tr ≥ 2.5 ms |
- | 45 | V | ||
Vsc(safe) | short-circuit safe voltage | - | 18 | V | |
Vrp | reverse polarity voltage | - | 6 | V | |
IOSM | non-repetitive peak output current | - | 10 | A | |
IORM | repetitive peak output current | - | 7.5 | A | |
Ptot | total power dissipation | - | 60 | W | |
Tstg | storage temperature | -55 | +150 | °C | |
Tamb | operating ambient temperature | -40 | +80 | °C | |
Tvj | virtual junction temperature | - | 150 | °C |
PACKAGE OUTLINE
DBS23P: plastic DIL-bent-SIL power package; 23 leads (straight lead leCM GROUPh 3.2 mm) SOT411-1