ACS758LCB-050B-PFF-T Pressure Sensor Thermally Enhanced, Fully Integrated, Hall Effect-Based

ACS758LCB-050B-PFF-T
Thermally Enhanced, Fully Integrated, Hall Effect-Based Linear Current Sensor IC with
100 μΩ Current Conductor A

Features and Benefits
▪ Industry-leading noise performance through proprietary amplifier and filter design techniques
▪ Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high voltage applications
▪ Total output error improvement through gain and offset trim over temperature
▪ Small package size, with easy mounting capability
▪ Monolithic Hall IC for high reliability
▪ Ultra-low power loss: 100 μΩ internal conductor resistance
▪ Galvanic isolation allows use in economical, high-side current sensing in high voltage systems
▪ 3.0 to 5.5 V, single supply operation
▪ 120 kHz typical bandwidth
▪ 3 μs output rise time in response to step input current
▪ Output voltage proportional to AC or DC currents
▪ Factory-trimmed for accuracy
▪ Extremely stable output offset voltage
▪ Nearly zero magnetic hysteresis

Description
The Allegro® ACS758 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. Typical applications include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurrent fault detection.
The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.
Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low output voltage ripple and low offset drift in high-side, high voltage applications.
The output of the device has a positive slope (>VCC / 2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100 μΩ typical, providing low power loss.

A part of stock list