Aluminum Electrolytic Capacitors/ FK

Surface Mount Type

Features

● Endurance: 2000 h to 5000 h at 105 °C

● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series)

● Vibration-proof product is available upon request. (φ8 mm and larger)

● RoHS directive compliant

Specifications

Category Temp. Range	–55 °C to +105 °C
Rated W.V.Range	6.3 V.DC to 100 V.DC
Nominal Cap.Range	3.3 µF to 6800 µF
Capacitance Tolerance	±20 % (120 Hz/+20 °C)
DC Leakage Cur rent	I ≦ 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δ	Please see the attached standard products list
Characteristics at Low Temperature	W.V. (V)	6.3	10	16	25	35	50	63	80	100	(Impedance ratio at 120 Hz)
	Z(–25 °C)/Z(+20 °C)	2	2	2	2	2	2	2	2	2
	Z(–40 °C)/Z(+20 °C)	3	3	3	3	3	3	3	3	3
	Z(–55 °C)/Z(+20 °C)	4	4	4	3	3	3	3	3	3
Endurance	After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > φ12.5 and suffi x “G” in φ810.2, φ1010.2 are 5000 hours)
	Capacitance change		±30 % of initial measured value (Suffi x “G” is 35 %)
	tan δ		≦ 200 % of initial specifi ed value (Suffi x “G” is 300 %)
	DC leakage current		≦ initial specifi ed value
Shelf Life	After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to Soldering Heat	After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
	Capacitance change		±10 % of initial measured value
	tan δ		≦ initial specifi ed value
	DC leakage current		≦ initial specifi ed value

Marking Dimensions in mm (not to scale) (Unit : mm)

Product Tags:

aluminium electrolytic capacitors smd

smd aluminium electrolytic capacitor

Inquiry Cart 0